Featured
On-line / off-line purification for hydraulic, turbine & lube oils
Removes particulate, water and dissolved gases from industrial oils. NAS cleanliness up to grade 6, water content down to 50 ppm.
View details →
Featured
Higher flow rate, deeper dehydration for continuous-duty operation
Built for high-flow continuous service. Multi-stage vacuum dehydration with heater and fine filter achieves 30 ppm water and NAS 5 cleanliness.
View details →
Featured
Nano-precision membrane filtration combined with vacuum dehydration
Our flagship product. Combines proprietary nano-screening membrane with vacuum dehydration. NAS 2 cleanliness for high-precision hydraulics, turbine lube and EHC fluid.
View details →
For phosphate ester (EHC) hydraulic fluids in steam turbine control systems
Specifically designed for EHC fluid (phosphate ester) in steam turbine governing systems. Stops servo-valve sticking and erosion. Resistivity and cleanliness restored to spec.
View details →
Aviation kerosene, diesel, light fuel oil & low-viscosity lube dehydration
High-efficiency dehydration for light hydrocarbon fuels and low-viscosity oils. Reduces water content below 30 ppm without thermal stress.
View details →
Vertical centrifugal filtration with scraper discharge - zero consumables
Self-cleaning centrifugal separator removes solid contaminants from oil continuously. No consumable filter media required - reduces operating cost dramatically.
View details →
For in-line polishing - removes particles and free water
Stacked-disc filter elements with high dirt-holding capacity. Achieves ISO 4406 14/12/9 or better for in-service systems.
View details →
Portable high-precision unit with on-line oil condition monitoring
Trailer-mounted mobile unit for on-site service. Combines ultra-fine filtration with continuous oil monitoring sensors. NAS 2 cleanliness achievable.
View details →
Compact purifier for small oil stations - up to 5 m³
Cost-effective solution for small-volume users. Compact footprint, easy installation. Ideal for workshops and small oil depots.
View details →
For industrial gear oil & oil-film bearing oil at 220 cSt
Designed for high-viscosity industrial gear oils and oil-film bearing oils. Robust construction for 24/7 operation.
View details →
Next-generation centrifugal purifier with broader oil-condition range
Replacement upgrade for legacy centrifugal separators. Wider viscosity and contamination tolerance, lower noise, easier maintenance.
View details →
Built for 320# industrial gear oil & oil-film bearing oil
Purpose-built for very high-viscosity industrial gear oils and oil-film bearing oils. Strong heating and vacuum performance.
View details →
For fatty-acid-ester and water-glycol fire-resistant hydraulic fluids
Two models - one for fatty-acid-ester HFC fluids, one for water-glycol HFC fluids. Flow rates 60/100/150 L/min. Material compatibility assured.
View details →
ATEX/IECEx-rated design for hazardous-area service
For hydraulic, turbine and industrial gear oils in hazardous areas. Explosion-proof motor, controls and enclosure. Globally certified.
View details →
Hybrid vacuum + centrifugal technology for high-viscosity oils
Combines centrifugal solid-removal with vacuum dehydration in one frame. Specifically designed for oil-film bearing oil and high-viscosity industrial lube oils.
View details →Our engineers can customise a purification solution for your oil type, operating conditions and site constraints.
Talk to an engineer